{"title":"Table Saw \u0026 Bandsaw Parts","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eReproduction and replacement parts for vintage Delta saws, including the Unisaw, table saws, and 14\" band saws. This collection brings together fence components, belts, cams, knobs, guards, blades, springs, and precision hardware essential for restoring and maintaining classic Delta equipment. Perfect for bringing older machines back to accurate, reliable performance.\u003c\/p\u003e","products":[{"product_id":"band-saw-fence-pin-block","title":"BAND SAW FENCE PIN BLOCK","description":"\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eCLAMP BLOCK FOR INSIDE A VINTAGE DELTA 14” BAND SAW FENCE CASTING\u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003eNew CNC machined part that duplicates the Delta OEM part #NCS-252\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003eMachined from 6061 aluminum bar stock.  The threads are 7\/16-14.\u003c\/strong\u003e\u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798803275926,"sku":"BS-003","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/69136fa2947629a3287d0bd4_Clampblock-bandsawfence_1.jpg?v=1764087504"},{"product_id":"delta-14-band-saw-grommets","title":"DELTA 14\" BAND SAW GROMMETS","description":"\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003eRUBBER GROMMETS FOR THE OPENINGS IN THE UPPER ARM OF A VINTAGE DELTA 14\" BAND SAW.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003eTwo (2) identical rubber grommets that perfectly fit the 3\/4\" diameter openings for the electrical cord for the OEM work light in the Delta band saw's upper support arm.  One opening is directly behind the vertical blade guidepost and the other opening is at the lower rear side of the support arm where the original equipment cord exited.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003eOriginal grommets get hard and brittle over time and are not salvageable when restoring a vintage Delta band saw.  The grommets required to fit these two locations are unusual in their size and shape because of their having to accommodate the extra thick wall of the casting.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003eWe have been able to source these hard-to-find grommets for this application and use them on every machine restoration we complete.  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003eThese grommets are easiest installed if they are first lubricated with spray silicon or liquid dish soap.\u003c\/strong\u003e\u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798803374230,"sku":"BS-001","price":5.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/69136fa2947629a3287d0baf_PXL_20220612_163132571.jpg?v=1764087509"},{"product_id":"delta-unisaw-load-spring-at-arbor","title":"DELTA UNISAW LOAD SPRING AT ARBOR","description":"\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eThis is the wave washer that spring loads the bearings in a Delta Unisaw arbor assembly.\u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eIt is shown in the photo that lays out the parts required to assemble an arbor.  The load spring is the wave washer behind the first bearing.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eThis part, if bought from Delta goes by the description “load spring”, under part number 928-06-020-7382.  \u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eWe have been able to manufacture this replacement spring steel wave washer to the correct dimensions required to fit behind the arbor bearing and can offer it at a fraction of the cost of the Delta part.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eOur finished wave washers are black oxide plated for increased corrosion protection,\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798803538070,"sku":"TS-013","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/69136fa2947629a3287d0b5b_IMG_2117.jpg?v=1764087516"},{"product_id":"delta-fence-rail-mounting-kit","title":"DELTA FENCE RAIL MOUNTING KIT","description":"\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan\u003eDelta Unisaw Rail mounting kit\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cspan\u003e\u003cstrong\u003eThere are two (2) long bolt assemblies and two (2) short bolt assemblies in this kit.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cspan\u003e\u003cstrong\u003eThe long bolts are for the front rail and are secured with the lock washers and nuts.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cspan\u003e\u003cstrong\u003eThe short bolts are for the rear rail and thread directly into the saw’s tapped holes.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cspan\u003e\u003cstrong\u003eAlso included is the square to round spacer.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cspan\u003e\u003cstrong\u003eThe bolts have been black oxide plated for corrosion protection.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798803669142,"sku":"TS-003","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/690a61e9dda5582fc6387cb1_1_2.jpg?v=1764087522"},{"product_id":"delta-unisaw-dust-deflector","title":"DELTA UNISAW DUST DEFLECTOR","description":"\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eDUST DEFLECTOR FOR THE INTERIOR OF A UNISAW\u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eThis is the sheet metal dust deflector that goes inside a vintage UNISAW directly in front of the blade.  This deflector keeps sawdust and wood pitch from contacting the front trunnion area of the saw’s internal components and directs particles coming off the saw blade down into the base of the cabinet.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003eThis is the original dent and rust-free OEM sheet metal stamping.  However, it has been sandblasted and then ceramic coated with a finish similar to Jet-hot coating.  The coating makes the part’s surfaces shine like chrome and assists with sawdust and pitch not sticking to the inside of the deflector.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003eEach dust deflector comes with two machined aluminum spacers and two stainless steel 5\/16 – 18 bolts to mount it in the Unisaw.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798803767446,"sku":"TS-001","price":33.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/69136fa2947629a3287d0b71_IMG_9768.jpg?v=1764087525"},{"product_id":"delta-bullet-motor-name-plate","title":"DELTA BULLET MOTOR NAME PLATE","description":"\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: Tahoma, sans-serif;\"\u003eReplacement motor data plate for the vintage UNISAW bullet motor.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: Tahoma, sans-serif;\"\u003e We reproduced this plate with the same high quality as our other decals and Unisaw accessories. This item starts with a laser cut anodized and brush finished aluminum disc and has a custom created decal professionally applied that replicates the single phase 115\/230-volt data plate as found on the end of the housing on most early Delta Unisaw bullet motors. The original motor data plate was attached to the motor with drive rivets and is often discarded when the motor is rebuilt. Removing the drive rivets often damages the fragile OEM data plate and often results in sheared rivets being left in the original motor housing. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: Tahoma, sans-serif;\"\u003eWhen we set out to replicate the plate, we elected to include automotive type double sided emblem adhesive tape to alleviate the riveting issue. The tape provided is a cut-to-size donut shaped disc to allow for clearance of the brass bearing closure plug at the centerline of the housing. The tape is 3M VHB (very high bond) double sided foam tape. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cspan\u003e\u003cstrong\u003eSuggested instructions for installation of the new motor data plate are included. These 3\" diameter plates and decals have been carefully and painstakingly recreated from the dimensions of the original plates and from the original data tag artwork. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003eWe laser cut an anodized and brush finished aluminum backing plate to match the size and shape of the original nameplate. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003e A high-quality decal was created replicating the original Delta artwork and applied to the face of the plate.\u003c\/strong\u003e\u003cb\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eSuggestions for installation of your reproduction Bullet Motor name plate\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpFirst\"\u003e\u003cstrong\u003e1.    It is best to install the data tag on the motor once the motor is in position on the saw to prevent damaging the tag during handling of the motor.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cstrong\u003e2.    Clean the surfaces of the saw motor and the backside of the data tag with lacquer thinner or acetone and let dry.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cstrong\u003e3.    Remove the protective paper from either side of the adhesive disc and apply the double-sided tape to the end of the motor.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cstrong\u003e4.    Press securely into the motor housing to insure adhesion.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cstrong\u003e5.    Remove the second protective layer and position the motor tag against the remaining exposed adhesive in the orientation you wish to read it\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798803800214,"sku":"MP-002","price":19.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/69136fa1947629a3287d0b37_IMG_0054.jpg?v=1764087526"},{"product_id":"delta-diagonal-switch-bracket","title":"Delta diagonal switch bracket","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eDIAGONAL SWITCH MOUNTING BRACKET - AS USED IN THE MOTOR JUNCTION BOX ON VINTAGE DELTA DRILL PRESS AND OTHER TOOLS.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003eThis bracket mounted the Cutler Hammer switch that was used to start and stop the motors on Delta machines that used a pull rod connected to the toggle lever on the switch. The bracket is an exact replica of the Delta bracket. It has been laser cut from .030\" thick 304 stainless steel.\u003c\/strong\u003e\u003c\/div\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798803832982,"sku":"HW-003","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/69136fa0947629a3287d0ac7_PXL_20220720_214753933.jpg?v=1764087528"},{"product_id":"delta-14-band-saw-angle-gauge","title":"Delta 14\" BAND SAW ANGLE GAUGE","description":"\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cu\u003e\u003cspan\u003eThis is an angle gauge plate to fit the Delta vintage 14’ band saw.\u003c\/span\u003e\u003c\/u\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003eThe original angle gage or tilt indicator plate that is used to set the worktable position was made from thin aluminum and was often dented, dinged, scratched, damaged, painted over, or lost. Our tilt indicator plates are newly manufactured and better than the originals. These nominal 5\/8\" x 4\" plates are made of stainless steel and have been carefully and painstakingly recreated from the dimensions of the original plates and from the original artwork. The indicator blanks were laser cut from .030\" thick 304 stainless steel before being carefully deburred and brush finished, prior to application of a high quality bright red vinyl decal. The holes in the angle gage plates are an exact to match the original plates and use the original holes to mount.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003e  When restoring or refurbishing a 14” band saw, getting the old angle gage plate off is always difficult because of the drive rivets Delta used to install it. Removing the rivets, more often than not, damaged the gage plate to some extent. That problem has now gone away, now that a replacement gauge is available.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003eWe use a small chisel to loosen each rivet by tapping at the base of each on all four sides, with less concern about plate damage. Once loose, the rivets can be removed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003eInstallation of a new plate after the machine is painted and complete can be done with OEM type rivets or with screws like we use in our restoration work. The original rivets holes can be drilled out with a #38 drill bit and tapped for 5-40 pan head screws. We find that screwing the new plate back in place with stainless steel makes more sense than using the once installed non-removal rivets.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798803898518,"sku":"GG-003","price":14.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/69136fa1947629a3287d0b27_s-l1600_cc36b673-6fc7-4f21-96ab-9ad21f862a25.jpg?v=1764087531"},{"product_id":"delta-unissaw-angle-gauge","title":"DELTA UNISAW ANGLE GAUGE","description":"\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003eThe original angle gage or tilt indicator plate that is used to set the worktable position was made from thin aluminum and was often dented, dinged, scratched, damaged, painted over, or lost. Our tilt indicator plates are newly manufactured and better than the originals. These plates are made of stainless steel and have been carefully and painstakingly recreated from the dimensions of the original plates and from the original artwork. The indicator blanks were laser cut from .030\" thick 304 stainless steel before being carefully deburred and brush finished, prior to silk screening. The holes in the angle gage plates are an exact to match the original plates and use the original holes to mount.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003eEach plate is individually bagged and shipped in a protective envelope. When restoring or refurbishing a Unisaw, getting the old angle gage plate off is always difficult because of the drive rivets Delta used to install it. Removing the rivets, more often than not, damaged the gage plate to some extent. That problem has now gone away, now that a replacement gauge is available.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003eWe use a small chisel to loosen each rivet by tapping at the base of each on all four sides, with less concern about plate damage. Once loose, the rivets can be removed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003eInstallation of a new plate after the machine is painted and complete can be done with OEM type rivets or with screws like we use in our restoration work. The original rivets holes can be drilled out with a #38 drill bit and tapped for 5-40 pan head screws. We find that screwing the new plate back in place with stainless steel makes more sense than using the once installed non-removal rivets.\u003c\/strong\u003e\u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798804029590,"sku":"GG-001","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/69136fa1947629a3287d0ae0_IMG_1429.jpg?v=1764087538"},{"product_id":"delta-unisaw-1725-rpm-matched-set-of-3-v-belts","title":"DELTA UNISAW 1725 RPM MATCHED SET OF 3 V BELTS","description":"\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003eBRAND NEW MATCHED SET OF 3 V BELTS FOR DELTA 49-101 UNISAW 1725 RPM MOTOR.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003eFinally, there is a better alternative to the overpriced Delta belts. The Unisaw 1725 series V belt has a special outer wrap used on the belts, which provides better flexibility, better traction and wear resistance. All V belts have a standard 1\/2″ width. All of our belts are Antistatic, Oil- and heat-resistant v-belts. The belts exceed USA RMA published ratings levels. They are designed to perform at the identical or higher level than all other major USA Manufacturer’s belts of the same type.\u003c\/strong\u003e\u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798804127894,"sku":"BL-001","price":26.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/69136f97947629a3287d0531_IMG_3522-Copy.jpg?v=1764087540"},{"product_id":"arbor-assembly-nut-and-lockwasher-used-on-the-right-hand-end-of-a-unisaw-arbor","title":"ARBOR ASSEMBLY NUT AND LOCKWASHER - used on the right hand end of a Unisaw arbor","description":"\u003cp align=\"center\"\u003e\u003cspan style=\"font-family: Arial;\"\u003e\u003cstrong\u003eThis is the fine thread nut and lock washer that secures the sandwiched bearings, spacers, and pulley into the arbor casting for a Delta Unisaw.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cspan style=\"color: #0000ff; font-family: Arial;\"\u003e\u003cstrong\u003eDo not confuse this nut with the \"ARBOR NUT\" we offer.  The 5\/8 - 12 left hand thread \"arbor nut\" is the nut that secures the saw blade to the saw.  This right hand fine thread is the assembly nut for the rotating arbor components.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: Arial;\"\u003eThe nut's thread is a special 17mm fine pitch thread that exactly matches the original Delta thread.  The nut will work on OEM Delta Unisaw arbors as well as our newly manufactured replacement arbor.  The equivalent Delta part number for this nut is 902012009847S. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: Arial;\"\u003e The lock washer we offer is an improvement over the saucer shaped lock washer that Delta offers.  The saucer shaped Delta lock washer is part number 904050106664. The Delta OEM keyed washer must be deformed around the perimeter when attempting to bend a side up against the nut in an effort to prevent inadvertent loosening of the nut.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: Arial;\"\u003eOur lock washer is similarly keyed to fit the arbor shaft to prevent rotation, but there are 11 equal spaced tabs on our lock washer.... to allow one, two, or more tabs to be easily bent up against the flats of the fully tightened nut.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: Arial;\"\u003eBoth our newly manufactured 17mm nut and the tabbed lock washer have been black oxide plated to increase corrosion protection.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798804357270,"sku":"TS-002","price":16.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/69136f9c947629a3287d06db_arbor_retaining_nut_and_lockwasher_1.jpg?v=1764087550"},{"product_id":"delta-unisaw-fence-locking-knob","title":"Delta Unisaw Fence Locking Knob","description":"\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eThis is a brand new, much improved, finger knob for the tightening the rear clamp on your vintage UNISAW fence.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003eThis is an easy-to-install replacement knob for tightening the rear clamp's J-hook found on the early style Delta Unisaw fences.  The early fence, as shown in the photos, required the operator to finger tighten the upper knob at the fence casting separately from the lever actuated front clamp.  Later fences, called \"Jet-lock\" fences, do not have this finger knob, and required only the ball-ended lever be depressed to lock both the front and rear of the fence lever and ball.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003e  The small diameter of the stock finger knob and its very fine fluting making it somewhat difficult to pinch and turn to tighten the rear clamp.  Since most of the OEM knobs have been pinched and turned since probably the 1940's and 1950's, many have become worn to the point that the fluting is mostly smooth, making them even tougher to grip and turn.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003eOur new deeply fluted, comfortable-to-grip, easy to tighten, aluminum replacement knob is shown installed on a Unisaw fence and separately in several of the photos.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003eThis attractive 13\/16\" diameter knob has been CNC machined from billet aluminum bar, with nine (9) deep radiused flutes equally spaced around its perimeter.  These flutes allow the operator to easily grip and tighten the knob. Even though the knob is larger than the original Delta knob, it still is narrower than the actual fence itself and does not interfere with a piece of wood sliding along the fence.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cbr\u003e\u003cstrong\u003eThe knob is threaded 1\/4\"- 20 to match the fence's internal pull rod.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eA stainless-steel flat washer is included when we ship this knob.  The washer should be placed between the fence and the knob to reduce friction at the interface surface.\u003c\/strong\u003e\u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798804717718,"sku":"KB-004","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/690a61e7dda5582fc6387bf6_IMG_7579.jpg?v=1764087559"},{"product_id":"delta-hand-wheel-spinner-handles","title":"Delta hand wheel spinner handles","description":"\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eDelta hand wheel spinner handles, as used on the vintage Unisaw and Heavy-Duty shapers, and other Delta\/Rockwell equipment.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eThis sale is for ONE aluminum profiled spinner handle and ONE shaft that it spins on.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003eWe are reproducing these two parts and are selling them as a set…one handle and one shaft.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003eThe actual hand wheel shown in any of the photos is not included in this offering.  Only the spinner handle and shaft are included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003eThe handle is CNC machined from 6061 billet aluminum and counter bored so the shaft fits flush at the top.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003eThe diameter of the shaft is the same as the OEM Delta Unisaw and HD shaper handle spinners.  The shaft is knurled like the OEM handle to secure it into the hand wheel hole.  A small vial of Loctite 609 retaining compound is included with each spinner handle order to aid in securing the shaft in the hand wheel, if needed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003eThe handle’s largest diameter is 1” and the length is 2.75”.  The axle diameter is .336”.  These spinner handles and shafts may work on many other Delta machines and possibly on other brands of equipment as well.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798804783254,"sku":"KB-006","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/IMG_0480.jpg?v=1762130231"},{"product_id":"14-bandsaw-high-tension-spring","title":"14\" Bandsaw  High Tension Spring","description":"\u003cp\u003e\u003cstrong\u003eThe high-tension spring will restore the tension available for resawing on bandsaws and may even improve the performance of new machines. The high-tension band saw spring replacement provides greater durability, superior strength and is a direct replacement for the spring in most 14\" saws. The high-tension spring gives you the ability to properly tension larger blades to give your 14\" saw superior tracking over the stock spring that comes with most saws. This in turn allows you to make straighter, more precise cuts. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e·        Will produce over 10,000 PSI of blade tension\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e·        Measures 2-9\/16\u003csup\u003eth\u003c\/sup\u003e long\u003c\/strong\u003e\u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798805078166,"sku":"BS-005","price":18.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/69136f9a947629a3287d063b_image0_fc39b7f5-1c16-4caa-8502-ee802cea69d2.jpg?v=1764087573"},{"product_id":"dust-door-latch-cam-for-a-delta-unisaw-or-the-delta-heavy-duty-shaper","title":"DUST DOOR LATCH CAM FOR A DELTA UNISAW OR THE DELTA HEAVY DUTY SHAPER","description":"\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eDUST DOOR LATCH CAM FOR A DELTA UNISAW OR THE DELTA HEAVY DUTY SHAPER.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan\u003eTHIS LISTING IS FOR THE CAM ONLY! THE KNOB AND SHAFT IN THE PICTURE ARE NOT INCLUDED.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eOur new billet aluminum cam will work with your existing shaft and knob. It’s better than the OEM part that was die cast and zinc plated.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003e Our replacement cam is CNC machined from 6061 billet aluminum bar and is designed for a slip fit onto the dust door shaft. We have moved the set screw retaining hole to the opposite side of the cam where there is more material present for the threaded hole.  The set screw securely holds the cam onto the shaft when tightened against the flat on the shaft, eliminating the need for the OEM style “D-shaped hole. \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003e The cam is provided complete with a 5\/16 stainless steel set screw in place.\u003c\/b\u003e\u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798805274774,"sku":"TS-010","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/69136f99947629a3287d0595_IMG_2130.jpg?v=1764087581"},{"product_id":"delta-unisaw-jet-lock-fence-rear-cam","title":"DELTA UNISAW JET-LOCK FENCE REAR CAM","description":"\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eIs your Delta Unisaw Jet-Lock fence not “locking” the rear clamp like it should?\u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eIt could be due to a damaged lever in the rear clamp casting.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003cspan style=\"color: rgb(43, 0, 255);\"\u003eREPLACES\u003c\/span\u003e \u003cspan style=\"color: #0039f3;\"\u003eOEM DELTA PART # 422-04-067-5001\u003c\/span\u003e\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eThis part is an exact replacement for the original equipment cam lever that is located inside the casting at the rear of the rip fence.  This small lever is actuated by the operator to clamp the fence at the rear rail on a Delta Unisaw. \u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003eOriginal equipment cam levers were made of mild steel and were prone to distortion when the fence clamp was over-tightened or improperly adjusted.\u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003e\u003ci\u003eOur cam is an exact copy of the Delta cam but is laser cut from 304 stainless steel.  304 stainless-steel has a yield strength of 160,000 psi as compared to the 65,000-psi yield strength of the OEM mild steel cam.  The pivot hole was then precision reamed to the correct diameter and deburred.\u003c\/i\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003ci\u003e \u003c\/i\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003eThe newer style Jet-lock fence, with the single lever that secured both the front and rear of the Unisaw fence in one motion, was Delta’s better idea.  The slotted screw above the lever was present to preset the J-hook’s clearance to the rear rail so that when the lever was pushed down to lock the front of the fence, the fence internal cast iron lever’s stroke would snug up the rear clamp.\u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003eHowever, adjustment of the rear clamp clearance was tricky and easily set too snug.  If the clearance set by the slotted nut was inadequate, the rear clamp would immediately tighten…. and as the front lever completed its stroke, the cam inside the rear clamp block would be bent.  Once that happened, restoring the rear clamp’s intended function would be nearly impossible, depending on how much the cam had deformed.\u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003eEarlier fences were less prone to this problem.  On early fences, the operator tightened the rear clamp with his fingers using a small, fluted knob above the front clamping lever.  It would be nearly impossible to distort the rear clamp cam with only finger pressure on this hard-to-grip little knob.\u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003eInstalling our direct replacement cam lever is simple and easy, and will restore the function of your Delta fence rear clamp.\u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003e\u003ci\u003eOnly the cam lever is for sale in this listing.\u003c\/i\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003e\u003ci\u003eThe assembly drawing and the exploded view of the rear clamp block components are for reference only, and to show where and how the cam lever fits into the rear clamp block.\u003c\/i\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798805307542,"sku":"TS-005","price":12.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/69136f9a947629a3287d060f_image0_c3933a7c-5682-4dc0-bf66-3a608917aa64.jpg?v=1764087583"},{"product_id":"14-urethane-bandsaw-tires-replaces-delta-part-905145","title":"14\" URETHANE BANDSAW TIRES REPLACES DELTA PART# 905145","description":"\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003eThese high quality urethane bandsaw tires measure 14”x1”x1\/8”\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eThese are a direct replacement for Delta part # 905145\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003eAlso compatible on the following Delta 14” bandsaw models:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003e 28-141, 28-200, 28-203, 28-205, 28-206, 28-207, 28-209, 28-216, 28-230, 28-231, 28-240, 28-241, 28-243, 28-245, 28-248, 28-248F, 28-248G, 28-254, 28-255, 28-262, 28-263, 28-269, 28-270, 28-275, 28-276, 28-278, 28-280R, 28-283, 28-285, 28-290, 28-293, 28-299, 28-299A, 28-300, 28-303, 28-306, 28-348, 28-348F, 28-348G, 28-380, 28-475X\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003eDirectly replaces old, cracking, worn out tires. Help track the blade on the wheel again. Slightly smaller than wheel diameter to provide a tight fit. Bright color for easier inspection.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003eMade of high-quality material. Not easy to dry out. Won’t crack. Peel or harden as normal rubber tires do. Reliable and long-lasting use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cstrong\u003eSimply pry off the old tire with a flat-bladed screwdriver. Stretch and hook the new tire in the groove and done. It’s recommended to use hot soapy water to warm the urethane first. Install while they’re still hot for easy installation. We have also used a hairdryer or a heat gun with a low setting to warm the tires before installing.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e \u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798805438614,"sku":"BS-004","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/69136f9a947629a3287d0632_PXL_20250817_194631656.jpg?v=1764087591"},{"product_id":"delta-unisaw-spanner-bearing-retainer-nut","title":"DELTA UNISAW SPANNER BEARING RETAINER NUT","description":"\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cb\u003eSPANNER NUT FOR RETAINING THE FIXED BEARING IN A UNISAW ARBOR CASTING.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cb\u003eThis is what Delta called the bearing closure nut.  It retains the outside bearing into the arbor casting on a vintage Delta Unisaw.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cb\u003eOur replacement spanner nut has been CNC machined on state-of-the-art equipment from C1018 carbon steel.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cb\u003e(Most of the replacements available from parts houses across the country are die cast zinc nuts, and not equal to the steel replacement nuts we manufacture.)\u003c\/b\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cb\u003eThe wrench grooves in each were then precision ground across the centerline of the part.  The nominal outside diameter of this part is 1 5\/8”.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cb\u003eEach nut has been quality control checked for dimensions and tested by threading it into a stock Delta arbor casting.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cb\u003e\u003cu\u003e\u003cspan\u003eAlso include is a laser cut wrench for easy installation of the nut. See our other listing to purchase the wrench only.\u003c\/span\u003e\u003c\/u\u003e\u003c\/b\u003e\u003cu\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798805831830,"sku":"TS-004","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/69136f98947629a3287d0577_arborretainingnutandlockwasher_4.jpg?v=1764087607"},{"product_id":"unisaw-short-style-locking-wedge-shaft-for-handwheels","title":"UNISAW SHORT STYLE LOCKING WEDGE SHAFT FOR HANDWHEELS","description":"\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eReplacement threaded shaft for the center lock knobs on the UNISAW handwheels.\u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cb\u003e\u003cu\u003e\u003cspan\u003eTHIS LISTING IS FOR ONE SHORT SHAFT ONLY. THE LONG SHAFT AND KNOBS ARE FOR ILLISTRATION ONLY!\u003c\/span\u003e\u003c\/u\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eThis is a “new” machined shaft, for the early style “wedge” lock system behind the center knob at either the tilt or elevate handwheel on your vintage Unisaw. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cstrong\u003eThe “wedge” lock system requires a short stubby shaft which pushes on a slotted pin driving two steel wedges out into the bore to secure the handwheel from drifting.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cstrong\u003e These components are often found to be missing or damaged during a rebuild of a vintage Unisaw. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cstrong\u003eThe price listed is for one shaft.  The knobs shown in the photos are for reference only and are not included with the shaft purchased from this site. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cstrong\u003eThe shafts are designed for a light press-fit into the knob.  However, each shaft order is provided with a small vial of Loctite retaining compound, should you find that your existing old knob fits too loosely on the new shaft. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eWe do have new billet aluminum style knobs available as shown in the photos.  We also have a matching “finger” knob available for the early style Unisaw fence.  Please check these other products in our store.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798805962902,"sku":"TS-015","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/69136f97947629a3287d054f_3.jpg?v=1764087609"},{"product_id":"delta-unisaw-fence-rear-clamp-knurled-finger-knob","title":"DELTA UNISAW FENCE REAR CLAMP KNURLED FINGER KNOB","description":"\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eThis includes one original style knurled finger knob for tightening the rear clamp on your vintage Delta Unisaw fence.\u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eThe price listed is for \u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003eone (1)\u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003e knob.\u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cstrong\u003eThese finger knobs were used to tighten the rear fence clamp on Delta Unisaws from the late 1930s until the early to mid 1950’s.  If your original knob is still there, chances are the knurling is almost worn off, making it tougher and tougher to tighten the rear clamp.  Many of these knobs are missing, having been replaced by some make-shift nut or odd ball knob.  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cstrong\u003eNow you can replace that original knob, or cobbled nut, with the type of finger knob Delta intended to be there. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cstrong\u003eWe have recreated the original style knurled finger knob.  Our knob is knurled, profiled, counterbored, and then threaded 1\/4\"-20.  We start with high quality Engraver’s brass rod, machine the knob using CNC equipment, and then nickel plate the finished knob for appearance and long-term corrosion protection. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cstrong\u003eA stainless-steel flat washer is included with each knob.  The washer should be placed between the fence and the knob to reduce friction at the interface surface. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798805995670,"sku":"KB-005","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/69136f97947629a3287d0534_OEMstyleknob_5.jpg?v=1764087611"},{"product_id":"brackets-for-the-wood-guard-on-a-vintage-delta-14-band-saw","title":"BRACKETS FOR THE WOOD GUARD ON A VINTAGE DELTA 14” BAND SAW","description":"\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cstrong\u003eBRACKETS FOR THE WOOD GUARD ON THE RETURN SIDE OF THE BLADE FOR A DELTA 14” BAND SAW\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cstrong\u003eDelta part number LBS-179 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cstrong\u003eThe guard for the return side of the band saw blade was made of wood on the earlier Delta 14” band saws.  The guard was secured to the top and bottom studs that hold the wheel covers on with two stamped sheet metal u-shaped brackets.  These brackets were secured to the wood guard with wood screws. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cstrong\u003eLater band saws, mostly with the 15\/16” round post, had a molded plastic rear blade guard.  This plastic guard had a loop in each end that fit over these same two studs. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cstrong\u003eThese brackets will not work on band saws that have hinged wheel covers. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cstrong\u003eWhen you add a riser kit to your band saw, the kits usually come with a wood guard similar to the early Delta version but are about 6” longer.  If you are replacing a wood guard, you can reuse the brackets. If you are replacing a molded plastic guard with the long wood version that comes in most riser kits, you will need to find a set of OEM brackets or buy the reproduction set offered in this listing. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cstrong\u003eOur reproduction brackets are formed from 16 ga aluminum sheet and come with wood screws for installation.  The brackets each have four screw holes, but Delta only put screws in the two inside holes, opposite the opening for the blade, where the wood on the guard is thicker. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003ci\u003eSEE OUR OTHER LISTING FOR THE WOOD GUARD ON THE RETURN SIDE OF THE VINTAGE 14\" BAND SAW\u003c\/i\u003e\u003c\/strong\u003e\u003c\/div\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798806028438,"sku":"BS-006","price":14.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/69136f9a947629a3287d05d2_PXL_20240301_161233820.jpg?v=1764087612"},{"product_id":"return-blade-guard-for-a-vintage-delta-14-wood-or-wood-metal-band-saw","title":"RETURN BLADE GUARD FOR A VINTAGE DELTA 14” WOOD OR WOOD\/METAL BAND SAW","description":"\u003cp style=\"text-align: center;\" align=\"center\" class=\"MsoNormal\"\u003e\u003cb style=\"mso-bidi-font-weight: normal;\"\u003e\u003cspan style=\"font-size: 14.0pt; line-height: 115%; font-family: 'Tahoma',sans-serif;\"\u003eRETURN BLADE GUARD \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" align=\"center\" class=\"MsoNormal\"\u003e\u003cb style=\"mso-bidi-font-weight: normal;\"\u003e\u003cspan style=\"font-size: 14.0pt; line-height: 115%; font-family: 'Tahoma',sans-serif;\"\u003eFOR A VINTAGE DELTA 14” WOOD OR WOOD\/METAL BAND SAW\u003c\/span\u003e\u003c\/b\u003e\u003cb style=\"mso-bidi-font-weight: normal;\"\u003e\u003cspan style=\"font-size: 12.0pt; line-height: 115%; font-family: 'Tahoma',sans-serif;\"\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" align=\"center\" class=\"MsoNormal\"\u003e\u003cb style=\"mso-bidi-font-weight: normal;\"\u003e\u003cspan style=\"font-size: 12.0pt; line-height: 115%; font-family: 'Tahoma',sans-serif;\"\u003eThis is the wood guard located to the left side of the worktable.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eDelta’s part number for this wood guard is LBS-191.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eIt is slotted to allow the return side of the saw blade to be covered to protect the operator.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" align=\"center\" class=\"MsoNormal\"\u003e\u003cb style=\"mso-bidi-font-weight: normal;\"\u003e\u003cspan style=\"font-size: 12.0pt; line-height: 115%; font-family: 'Tahoma',sans-serif;\"\u003eThis exact replica of the original equipment guard has been professionally cut and routered from clear (blemish and knot free) poplar wood.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" align=\"center\" class=\"MsoNormal\"\u003e\u003cb style=\"mso-bidi-font-weight: normal;\"\u003e\u003cspan style=\"font-size: 12.0pt; line-height: 115%; font-family: 'Tahoma',sans-serif;\"\u003eThe clearance cuts and blade slot duplicate the OEM guard.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eHowever, we have improved the design by making a smooth radius corner, unlike the sharp edges of the original.\u003c\/span\u003e\u003c\/b\u003e\u003cb style=\"mso-bidi-font-weight: normal;\"\u003e\u003cspan style=\"font-size: 12.0pt; line-height: 115%; font-family: 'Tahoma',sans-serif;\"\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" align=\"center\" class=\"MsoNormal\"\u003e\u003cb style=\"mso-bidi-font-weight: normal;\"\u003e\u003cspan style=\"font-size: 12.0pt; line-height: 115%; font-family: 'Tahoma',sans-serif;\"\u003eOur wood replica needs very little prep before it can be primed and painted to match the saw color or stained and varnished if desired.\u003c\/span\u003e\u003c\/b\u003e\u003cb style=\"mso-bidi-font-weight: normal;\"\u003e\u003cspan style=\"font-size: 12.0pt; line-height: 115%; font-family: 'Tahoma',sans-serif;\"\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" align=\"center\" class=\"MsoNormal\"\u003e\u003cb style=\"mso-bidi-font-weight: normal;\"\u003e\u003cspan style=\"font-size: 12.0pt; line-height: 115%; font-family: 'Tahoma',sans-serif;\"\u003eThis guard attaches to the band saw with an upper and lower formed sheet metal bracket that screws to this wood guard and captures the pins that hold the sheet metal covers in place. \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" align=\"center\" class=\"MsoNormal\"\u003e\u003cb style=\"mso-bidi-font-weight: normal;\"\u003e\u003cspan style=\"font-size: 12.0pt; line-height: 115%; font-family: 'Tahoma',sans-serif;\"\u003e\u003cspan style=\"mso-spacerun: yes;\"\u003e \u003c\/span\u003eThe brackets are Delta part number LBS-179.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" align=\"center\" class=\"MsoNormal\"\u003e\u003cb style=\"mso-bidi-font-weight: normal;\"\u003e\u003cspan style=\"font-size: 12.0pt; line-height: 115%; font-family: 'Tahoma',sans-serif;\"\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" align=\"center\" class=\"MsoNormal\"\u003e\u003cb style=\"mso-bidi-font-weight: normal;\"\u003e\u003cspan style=\"font-size: 18.0pt; line-height: 115%; font-family: 'Tahoma',sans-serif; color: red;\"\u003eThis is for wood guard only and does not include mounting brackets or screws.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003e\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" align=\"center\" class=\"MsoNormal\"\u003e\u003cb style=\"mso-bidi-font-weight: normal;\"\u003e\u003cspan style=\"font-size: 12.0pt; line-height: 115%; font-family: 'Tahoma',sans-serif; color: red;\"\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" align=\"center\" class=\"MsoNormal\"\u003e\u003cb style=\"mso-bidi-font-weight: normal;\"\u003e\u003cspan style=\"font-size: 12.0pt; line-height: 115%; font-family: 'Tahoma',sans-serif; color: red;\"\u003eSee our other listing for our reproduction aluminum die formed brackets. \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798806061206,"sku":"BS-002","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/69136f9a947629a3287d05e8_image0_ddd4dd0d-5e2b-4262-8849-ddc2f54956c0.jpg?v=1764087614"},{"product_id":"delta-unisaw-jet-lock-fence-shaft-and-round-knob","title":"DELTA UNISAW JET-LOCK FENCE SHAFT AND POLISHED 6061 BILLET SATURN KNOB","description":"\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eA new 6061 billet aluminum Saturn knob and stainless-steel threaded shaft for the locking lever on your Delta Unisaw fence.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cb\u003e\u003cu\u003e\u003cspan\u003eThis is for the polished billet aluminum knob and stainless steel shaft. See our other listings for black and solid brass!\u003c\/span\u003e\u003c\/u\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e  \u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cb\u003eReplace the chipped, cracked, or missing knob on your everyday saw or during your vintage Unisaw restoration project.\u003c\/b\u003e \u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cstrong\u003eThis is a replacement knob and shaft for the lock lever on a Jet-lock fence found on many of the vintage Delta Unisaws.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cstrong\u003e The Saturn knobs have a 3\/8 - 24 x 5\/8\" deep internal thread, just like the OEM knobs had.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cstrong\u003e The original locking lever shafts were made of carbon steel and prone to rusting and bending.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cstrong\u003e The shaft in this listing is precision machined from type 303 stainless steel rod with 3\/8 - 24 threads on both ends to match both the ball's internal thread and threads in the OEM locking cam inside the head casting of the vintage Delta Unisaw fence.\u003c\/strong\u003e\u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798806126742,"sku":"KB-009","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/image1_01de373d-0e5f-4daa-bae0-a9f3cbd1fda0.jpg?v=1773163269"},{"product_id":"delta-jet-lock-fence-eccentric-cam-p-n-422-04-042-5002","title":"DELTA JET-LOCK FENCE ECCENTRIC CAM (p\/n 422-04-042-5002)","description":"\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eECCENTRIC CAM FOR THE VINTAGE DELTA\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e“JET-LOCK” TABLE SAW FENCE\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eThe eccentric is shown in the photos with the locking shaft and knob attached as it would be inside the fence head casting.  \u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003eThe part you are buying from this listing is ONLY the round cam that the arrow is pointing to.\u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003e  \u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003eThe shaft and knob are not included.\u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eThe later model Delta Jet-lock fence is the fence with the straight vertical face on the head casting, as opposed to the earlier Delta Micro-set fence which had a curved face on the head casting.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eDELTA TABLE SAW JET-LOCK FENCES HAD ONLY TWO MAJOR COMPONENTS INSIDE THE MAIN HEAD CASTING.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eThe first main component was the round cam with the offset pivot hole.  This part also had a drilled and tapped hole where the locking lever and knob attached.  Delta called this part the “eccentric” and listed it as\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003ep\/n 422-04-042-5002\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003eThe second component was the long narrow rectangular cast iron piece that pivoted on its own dowel pin to press on the fence rail to lock the fence in position.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eBoth of these components have been obsoleted by Delta.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eThis listing is for the replacement round cam (Delta part number 422-04-042-5002).\u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eThis part was subject to wear at the point on the OD that was in contact with the hardened pad on the rectangular lever.  However, a more common problem was when the 3\/8-24 fine threads, where the shaft and knob attaches, got stripped out or damaged.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eThere is no good repair for damaged threads on this part, because this part was heat treated to be extremely hard.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eWe have duplicated the original Delta part in every way.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eOur replacement is CNC machined from tool steel and flame hardened where it slides against the hardened wear pad on the rectangular lever arm that contacts the fence rail.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798806257814,"sku":"TS-008","price":28.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/690a61e7dda5582fc6387b96_PXL_20230414_175539068_e47afe1f-6c43-4aea-a21c-50aabfebce0c.jpg?v=1764087620"},{"product_id":"vintage-delta-micro-set-fence-cam-part-422-04-042-5005","title":"VINTAGE DELTA MICRO-SET FENCE CAM (PART # 422-04-042-5005)","description":"\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eVintage Delta Micro-set fence which had a curved face on the head casting. As opposed to the\u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003e later model Delta Jet-lock fence with the straight vertical face on the head casting\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eThe cam is shown in the photos with the locking shaft and knob attached as it would be inside the fence head casting.  \u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003eThe part you are buying from this listing is ONLY the round cam that the arrow is pointing to.\u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003e  \u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003eThe shaft and knob are not included.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eDELTA TABLE SAW MICRO-SET FENCES HAD ONLY TWO MAJOR COMPONENTS INSIDE THE MAIN HEAD CASTING.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eThe first main component was the round cam with the offset pivot hole.  This part also had a drilled and tapped hole where the locking lever and knob attached.  Delta called this part the “eccentric” and listed it as\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003ep\/n 422-04-042-5005\u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eThe second component was the long narrow rectangular cast iron piece that pivoted on its own dowel pin to press on the fence rail to lock the fence in position.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eBoth of these components have been obsoleted by Delta.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eThis listing is for the replacement round cam (Delta part number 422-04-042-5005).\u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eThis part was subject to wear at the point on the OD that was in contact with the hardened pad on the rectangular lever.  However, a more common problem was when the 3\/8-24 fine threads, where the shaft and knob attaches, got stripped out or damaged.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eThere is no good repair for damaged threads on this part, because this part was heat treated to be extremely hard.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eWe have duplicated the original Delta part in every way.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eOur replacement is CNC machined from tool steel and flame hardened where it slides against the hardened wear pad on the rectangular lever arm that contacts the fence rail.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798806290582,"sku":"TS-007","price":28.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/690a61e7dda5582fc6387b96_PXL_20230414_175539068_146ffe26-3c1a-4ab5-aa47-9fd7de6d7775.jpg?v=1764087623"},{"product_id":"lenox-bandsaw-blade-for-delta-14-bandsaw","title":"LENOX BANDSAW BLADE FOR DELTA 14\" BANDSAW","description":"\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003eLENOX BANDSAW BLADES\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003eLENOX FLEXBACK BANDSAW BLADE\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003eLenox Flexback 3\/8 X 93-1\/2”\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e6 TPI .025\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003eThe Lenox Flexback is a one-piece carbon steel blade. They are recommended for cutting soft and hardwoods as well as plastic and non-ferrous metals. Tooth hardness ranges between RC 64-67. They are highly flexible and have increased wear resistance and fatigue life. They will tolerate heat up to 300 degrees F before the temper is lost from the tooth edge. 1\u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798806323350,"sku":"BD-001","price":34.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/69136f97947629a3287d0561_image0_d7c62dba-89fd-4e7b-9555-c40e6ce7d7bc.jpg?v=1764087502"},{"product_id":"new-vintage-delta-pointer","title":"NEW VINTAGE DELTA POINTER","description":"\u003cp\u003eThese are new reproduction Delta pointers are precision made for a wide range of vintage Delta machines. Each order includes one pointer and a stainless-steel round head screw. These pointers were used across many Delta models, including (but not limited to) band saws, Unisaws, fences, 6 x 48 sanders, Unisaw Jr., tilt tables, and scroll saws. Please specify: Option A or B when ordering. Crafted for accuracy and durability, these reproduction pointers provide a clean, factory-correct look and function. \u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Small A","offer_id":45870061420694,"sku":"TS-012A","price":12.0,"currency_code":"USD","in_stock":true},{"title":"Large B","offer_id":45870061453462,"sku":"TS-012B","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/690a61e7dda5582fc6387c2a_image0_783d94c4-10ad-4ede-b454-290ce43f8d87.jpg?v=1764087636"},{"product_id":"deluxe-ball-bearing-spinner-handles-for-delta-unisaw-and-shaper-hand-wheels","title":"DELUXE BALL BEARING SPINNER HANDLES - FOR  DELTA UNISAW AND SHAPER HAND WHEELS","description":"\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eDELUXE BALL BEARING SPINNER HANDLES - FOR UNISAW AND SHAPER HAND WHEELS - 1 \u003c\/b\u003e\u003cb\u003ePAIR\u003c\/b\u003e\u003cb\u003e \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003cb\u003eNew chrome plated ball bearing spinner handles for improving the feel and performance of the OEM spinner handles on vintage Delta Unisaw and shaper hand wheels.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan style=\"color: #ee0000;\"\u003eThe hand wheels shown in the photos are for reference only and are not sold or included with this listing.  This listing is for one pair of deluxe chrome plated spinner handles only.\u003c\/span\u003e\u003c\/b\u003e\u003cspan style=\"color: #ee0000;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003cb\u003eThe spinner handles everyone is familiar with on OEM hand wheels are comprised of a machined and contoured aluminum handle and 5\/16\" splined and press fit shafts that the handle revolves on.  The OEM handles are not friction free, often need oiling, and don't provide a user-friendly grip and feel like the handles we are offering here.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003cb\u003eThese handles replace the stock two-piece handle.  The have integral bearings and a shaft inside the handle body, never need oil, and spin freely.  The handle shape is more comfortable fitting in the operator's hand and is chrome plated.  These are premium replacements for the stock spinners and make turning the handwheels for the elevation and tilt on a machine much more enjoyable.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003cb\u003eThese new deluxe handles are not difficult to install and are very much serviceable.  The OEM pin is first driven out with the handwheel well supported in a vice.  Once the OEM pin is out of the original hand wheel, the spinner and shaft are free from the hand wheel. The hole remaining is .312\" diameter, which is the correct size for tapping for new threads.  The hole needs to be tapped for 3\/8-16 threads to allow the new handle to be screwed into place.  Once screwed in and snugged with a 9\/16\" open end wrench, the hand wheel can be reinstalled on the saw or shaper.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eOnce you have tried these more comfortable hand wheels, you will have wished you had installed them years ago.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan style=\"color: #ee0000;\"\u003eSEE OUR OTHER LISTING FOR THE OEM ALUMINUM PRESS FIT SPINNER HANDLE AND SHAFT\u003c\/span\u003e\u003c\/b\u003e \u003cspan style=\"color: #ee0000;\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798806421654,"sku":"KB-003","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/s-l960_1.webp?v=1771897892"},{"product_id":"threaded-knobs-for-the-wheel-covers-on-vintage-delta-14-band-saws-new","title":"THREADED KNOBS for the WHEEL COVERS on VINTAGE DELTA 14\" BAND SAWS - NEW","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eTHREADED KNOBS for the WHEEL COVERS on VINTAGE DELTA 14\" BAND SAWS - NEW\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cu\u003e\u003cspan style=\"color: #ee0000;\"\u003eThese knobs are sold by the each.  The price listed is for one knob.  Most band saws require four matching knobs to secure both the top and bottom wheel covers.\u003c\/span\u003e\u003c\/u\u003e\u003c\/b\u003e\u003cu\u003e\u003cspan style=\"color: #ee0000;\"\u003e\u003c\/span\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eNew black fluted grip threaded knobs that are used to secure the upper and lower sheet metal wheel guards on a vintage Delta 14” band saws. \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eThe high gloss, black thermoset plastic knobs are 1 1\/2” in diameter and have a brass insert with a 3\/8-16 thread.  The hole is a through-hole so the stud can extend past the face of the knob if necessary.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eReplace the chipped, cracked, or missing knob on your everyday saw or during your vintage Delta band saw restoration project. \u003c\/b\u003e\u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798806454422,"sku":"KB-007","price":9.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/69136f97947629a3287d04ff_s-l1600.jpg?v=1764087626"},{"product_id":"delta-unisaw-miter-holder","title":"DELTA UNISAW MITER HOLDER","description":"\u003cp style=\"text-align: center;\" align=\"center\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: red;\"\u003eMITER HOLDER - HOLSTER - SCABBARD....................CALL IT WHAT YOU WANT......... BUT NOW WITH THIS DEVICE, YOU WILL ALWAYS KNOW WHERE YOUR MITER IS. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" align=\"center\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eThis neat little item attaches to the underside of your Unisaw table and stores your miter conveniently, safely, and close at hand, but totally out of the way. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" align=\"center\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: 'Arial',sans-serif;\"\u003eTHE GOOD THING.........THERE ARE NO HOLES TO DRILL IN YOUR VINTAGE UNISAW CABINET.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" align=\"center\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: 'Arial',sans-serif;\"\u003eYour miter usually lays on the saw's tabletop so it is there when you need it.........but when you don't need it, you cart it off to the bench................ or anywhere else you can find a place to lay it down.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" align=\"center\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: blue;\"\u003eWhy not store it at the saw?\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif;\"\u003e  This miter holder keeps your miter out of the way, close at hand, convenient, and safe from falling off the bench.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" align=\"center\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: 'Arial',sans-serif;\"\u003eThe miter is easy to grip with the handle side down, easy to insert in the generous tube opening, doesn't rattle when the saw is running, and is stored with the miter's metal rail in contact with PVC... not metal to metal.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" align=\"center\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: 'Arial',sans-serif;\"\u003eThis PVC tube, with its two brackets, bolts to the underside of the Unisaw's table using two of the existing table top's threaded bolt holes.  \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" align=\"center\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: 'Arial',sans-serif;\"\u003eThis holder accommodates a stock miter or even our long bar billet aluminum miter (Both are shown in one of the photos and the difference is dramatic !!!).  Plus, the location of this holder still allows our wrench hanger and wrench to stay conveniently in the designed position on the same right front table top bolt.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" align=\"center\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: 'Arial',sans-serif;\"\u003eThis holder can be installed on either the left or right side of the saw.......or if you have a couple of miters and want to store both conveniently close by..... buy two.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" align=\"center\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: 'Arial',sans-serif;\"\u003eThe position of the miter does not interfere with any of the saw's functions.  The head of the miter does not protrude out past the fence guide rails, so it is not at all in the way when operating the saw.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" align=\"center\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: 'Arial',sans-serif;\"\u003eThe easy-to-install miter holder comes preassembled with a gray heavy wall PVC tube, a pair of heavy duty clamps, and a pair of drilled and tapped 6061 aluminum brackets.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" align=\"center\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: 'Arial',sans-serif;\"\u003eFlat washers and longer bolts are included to replace the stock bolts when installing the holder to the underside of the table.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" align=\"center\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: 'Arial',sans-serif;\"\u003eWith your miter conveniently stored in this holder under the saw's table, it is safe and secure.  It can't fall from the bench or from the pile of boxes you laid it on.  It can't be damaged and the angular setting or the squareness of the miter won't be altered by a tumble onto the floor.  \u003cspan style=\"font-family: 'Arial',sans-serif; color: blue;\"\u003eWhy would you not have one of these on your saw\u003c\/span\u003e\u003cspan style=\"color: blue;\"\u003e?\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798806487190,"sku":"TS-006","price":24.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/69136f97947629a3287d050e_IMG_7448.jpg?v=1764087627"},{"product_id":"delta-unisaw-3450-rpm-motor-set-of-3-v-belts","title":"DELTA UNISAW 3450 RPM MOTOR SET OF 3 V BELTS","description":"\u003cp\u003eThis is a brand-new matched set of three V-belts designed for the Delta Unisaw 3450 RPM motor, replacing OEM part number 49-124. Finally — a better, more affordable alternative to the overpriced Delta belts. These precision-matched belts feature a special outer wrap that provides superior flexibility, traction, and wear resistance compared to standard belts. Each belt has a ½\" standard width and meets or exceeds U.S. RMA engineering and performance standards. They are antistatic, oil-resistant, and heat-resistant, ensuring long life and smooth, vibration-free performance on your vintage Unisaw. These belts are designed to match or outperform OEM specifications and are suitable for daily use or full restoration projects.\u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":45798806519958,"sku":"BL-003","price":26.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/69136f97947629a3287d0531_IMG_3522-Copy_ebc6249f-69d5-4f41-9f94-ea75a8f0254e.jpg?v=1764087629"},{"product_id":"delta-unisaw-locking-wedge-kit","title":"DELTA UNISAW LOCKING WEDGE KIT","description":"\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eNew “steel wedges, slotted pin, and spring” for the locking mechanism on your vintage Unisaw tilt and elevation shafts.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cspan\u003eOriginal “wedge locks” are often missing when rebuilding an early Delta Unisaw.  The wedge lock system was used on the early Unisaw from the late 1930’s until about 1948 when Delta converted the locking system to brass bullets.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cspan\u003eWithout the locks in place, the tilt and elevation mechanisms will not effectively lock the shafts in position when the knob in the center of the hand wheel is tightened.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cspan\u003eEach shaft requires one set of the wedges, slotted pin, and spring to complete an assembled lock.  These parts are compressed behind the center knob and short shaft in the center of each handwheel.  The knob and shaft are not included in the listing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cspan\u003eOur wedges are laser cut from 4130 alloy steel plate.  The slots are precision machined in the pin to match.  Each set of wedges is then fit and tested with a mating pin to insure free movement of the wedges within the slot.  The spring is all new, slightly longer, and with a bit less pressure than the original Delta spring, providing for a more forgiving wedge lock system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cspan\u003eThe pins have been black oxide plated for increased s corrosion protection.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cspan\u003eInstalling a wedge lock kit in the blind hole of a vintage Unisaw shaft is a bit tricky.  To facilitate an easier installation, we add a slot to the back end of the pin.  With a screw driver blade in this slot, pressure can be applied to compress the spring, while allowing you to rotate the pin as required to align the wedges with the slots.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eShipping to anywhere in the lower 48 states is $4.50.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cspan\u003eOther locations may have to pay an additional fee.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cspan\u003ePayment by PayPal is preferred. \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eThis listing is for one (1) set of wedges, one (1) slotted pin, and one (1) spring.  To do a complete saw restoration, you must buy two sets.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Vintage Delta Supply Co. ","offers":[{"title":"Default Title","offer_id":46252343230614,"sku":"TS-011","price":35.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/s-l500_28.webp?v=1771468929"},{"product_id":"delta-unisaw-service-kit-1","title":"DELTA UNISAW SERVICE KIT","description":"\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan\u003e   \u003c\/span\u003e\u003c\/b\u003e\u003cstrong\u003eInterior service kit for a Vintage Delta Unisaw \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e What goes where:   \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpFirst\" style=\"text-align: center;\"\u003e\u003cstrong\u003e·        The small diameter, thinner white plastic washer goes between the worm gear and the trunnion boss on the tilt shaft.  The small diameter, thicker white plastic washer goes on the other side of this same trunnion boss on the tilt shaft.  The clamp collar replaces the OEM pinned collar and installs next to the thick plastic washer on the tilt shaft.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\" style=\"text-align: center;\"\u003e\u003cstrong\u003e·        The washers are made of a friction reducing slippery plastic, but it is still a good idea to apply a little grease wherever the washers and saw parts are in contact and will rub on each other.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\" style=\"text-align: center;\"\u003e\u003cstrong\u003e·        Check to ensure the head of the clamp collar’s bolt clears the trunnion casting when rotated.  A small amount of die grinding of the casting may be required.  A low head bolt is also provided if you have issues with clearance at the shaft collar.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\" style=\"text-align: center;\"\u003e\u003cstrong\u003e·        The two similar thin plastic washers go at the rear of the elevation shaft, one on each side of the rear trunnion boss.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\" style=\"text-align: center;\"\u003e\u003cstrong\u003e·        Use the stainless-steel spring roll pins that are provided if your saw came with roll pins.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\" style=\"text-align: center;\"\u003e\u003cstrong\u003e·        Use the tapered pins that are provided if your saw came with tapered pins.  Tapered pins only fit through the worm gear, spacers, and shafts in one direction.  The gears and spacers must be reinstalled in the same location and on the same shafts they were originally on when the tapered holes were drilled and reamed.  You will likely need to grind or sand any excess protrusion from either end of the tapered pins when they are fully seated into the worm gears.  Any excess pin showing on either side of the mounted gear may interfere with the mating gear’s teeth.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpLast\" style=\"text-align: center;\"\u003e\u003cstrong\u003e·        Two of the thin plastic washers can also be used between the hand wheels and the saw at both the tilt and elevation shafts.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpLast\" style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003cstrong\u003eShipping anywhere in the lower 48 States.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003cstrong\u003e Other locations may have additional shipping charges.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Vintage Delta Supply Co. ","offers":[{"title":"Default Title","offer_id":46252343263382,"sku":"TS-009","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/image0_d498129b-8528-47c4-8a05-0335a4a309a8.jpg?v=1771961866"},{"product_id":"brass-bullets-for-a-locking-shaft-on-a-vintage-unisaw-tilt-and-elevation-handle","title":"Brass bullets for a locking shaft on a vintage Unisaw tilt and elevation handle","description":"\u003cdiv\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eNew \"Brass bullets\" for the locking mechanism on your vintage Unisaw tilt and elevation shafts.\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp class=\"MsoNormal\" align=\"center\"\u003e\u003cb\u003e\u003cspan\u003eThis listing is for one (1) pair of locking bullets.  To do a complete saw restoration, you must buy two sets.\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cspan\u003eOriginal \"bullets\" can get mushroomed and worn.... will not effectively lock the shafts in position when the center hand knob is tightened.  These replacement bullets are precision machined from .312\" diameter brass rod and are exact replacements for the Unisaw that used \"bullets\" versus the steel wedge type inserts of the earlier years.\u003c\/span\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cspan\u003eThe Original Delta Part # was 422-04-074-0001S.\u003c\/span\u003e\u003c\/b\u003e\u003c\/div\u003e","brand":"Vintage Delta Supply Co. ","offers":[{"title":"Default Title","offer_id":46252343459990,"sku":"HW-005","price":13.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/s-l500.webp?v=1771467780"},{"product_id":"stainless-steel-delta-rockwell-10-unisaw-motor-mounting-pin-with-clips","title":"STAINLESS-STEEL DELTA ROCKWELL 10\" UNISAW MOTOR MOUNTING PIN WITH CLIPS","description":"\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003eDELTA ROCKWELL 10\" UNISAW MOTOR MOUNTING PIN WITH CLIPS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003eThese are brand new and made from 304 Stainless Steel. We zinc plate the clips for added corrosion protection!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003eThe originals were made of steel and did not provide much protection from years of use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003eReplaces Delta part # 422-04-071-5001 \u003c\/strong\u003e\u003c\/p\u003e","brand":"Vintage Delta Supply Co. ","offers":[{"title":"Default Title","offer_id":46263039852694,"sku":"TS-016","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/image0_94b0854a-cc2e-4387-8541-9867cbfe97c0.jpg?v=1771966375"},{"product_id":"delta-unisaw-contractor-saw-blade-flange-washer","title":"DELTA UNISAW\/CONTRACTOR SAW BLADE FLANGE WASHER","description":"\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003eNEW BLADE WASHER\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003eOriginal Delta Part no. 422-04-103-5001.  This is the blade washer for the arbor on the Delta Unisaw\/ Contractor table saws that holds the blade on with the arbor nut.  This part will work on most 10\" table saws with a 5\/8\" arbor.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003eThe measurements are:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eOutside Diameter\u003cb\u003e - 2-1\/2\"  \u003c\/b\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eInside diameter\u003cb\u003e -  5\/8\"\u003c\/b\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eTotal thickness\u003cspan\u003e \u003c\/span\u003e\u003cb\u003e- 1\/4\"\u003c\/b\u003e\u003c\/p\u003e","brand":"Vintage Delta Supply Co. ","offers":[{"title":"Default Title","offer_id":46266600325270,"sku":"TS-017","price":15.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/image0_992f8bb8-1197-4f6c-8215-4bda7aaeac45.jpg?v=1772241507"},{"product_id":"delta-14-bandsaw-and-scroll-saw-table-insert-pair","title":"DELTA 14\" BANDSAW AND SCROLL SAW TABLE INSERT PAIR","description":"\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003eWe reproduced this insert from 5052 aluminum. It's a direct replacement for the Delta no. 426-02-063-0001 14\" bandsaw table insert.  Sold in sets of two pieces.  They also fit the Delta 18\" and 24\" scroll saws.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Vintage Delta Supply Co. ","offers":[{"title":"Default Title","offer_id":46266665992342,"sku":"BS-008","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/image0_4632233f-ebf6-4be7-bbf9-6242882912a3.jpg?v=1772251818"},{"product_id":"delta-table-saw-unisaw-throat-plate-insert-cnc-machined-aluminum-multiple-styles-available","title":"Delta Table Saw\/Unisaw Throat Plate Insert – CNC Machined ½” Aluminum | Multiple Styles Available","description":"\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003ePrecision Replacement Insert for Vintage Delta Table Saws\u003c\/b\u003e  \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003eThese premium replacement throat plates are precision CNC machined from solid ½” thick 6061 aluminum billet, providing superior rigidity and long-term durability compared to thin stamped inserts or plastic replacements. \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003eDesigned for restorers, collectors, and serious woodworkers, these inserts provide a precise fit and adjustable leveling for smooth, reliable operation on your Delta table saw.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e \u003cb\u003ePremium Construction\u003c\/b\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003eEach insert is machined from solid billet aluminum, not cast or stamped material. The result is a plate that remains flat, stable, and resistant to flex under heavy cutting conditions.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003eA radius-machined rear edge allows the plate to drop easily into the saw opening while maintaining a close, accurate fit once installed. \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eAdjustable Top-Side Leveling\u003c\/b\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003eFour precision threaded leveling holes allow the insert height to be adjusted from the top side of the saw. This makes leveling quick and convenient without removing the insert.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e Once adjusted, the plate sits flush with the table surface for smooth workpiece support. \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eAnti-Lift Safety Design\u003c\/b\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003eEach insert includes a 1\/8” hardened roll pin installed at the rear of the plate to prevent the insert from lifting during operation. \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003eA set screw positioned above the pin allows the rear clearance to be fine-tuned, ensuring a secure and stable fit within the saw table opening. \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eInsert Styles Available\u003c\/b\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003eChoose the insert configuration that best fits your cutting setup: \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003eZero Clearance\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eStandard\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003eStandard with a splitter slot\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e6\" Dado\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e8\" Dado\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003eMolding head cutter \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eWhy Vintage Delta Supply Inserts Are Different\u003c\/b\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003eMany aftermarket inserts lack the features needed for a precise and secure fit. \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003eVintage Delta Supply inserts are designed with: \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cspan\u003e✔\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ePrecision CNC machining\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cspan\u003e✔\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eThick ½” aluminum billet construction\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cspan\u003e✔\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eTop-side leveling adjustment\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cspan\u003e✔\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eAnti-lift rear roll pin system\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cspan\u003e✔\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eRear clearance adjustment set screw\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cspan\u003e✔\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eRadius-machined heel for easier installation\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003eThese details provide a tighter fit and more stable operation than most aftermarket insert plates. \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003ePerfect for Restoration Projects\u003c\/b\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003eWhether you are restoring a classic Delta table saw or upgrading a worn insert, these plates provide a durable and precise replacement designed to complement vintage Delta machines. \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eVintage Delta Supply Co.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cspan\u003e\u003cstrong\u003eSupporting craftsmen and collectors restoring classic Delta machinery\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Vintage Delta Supply Co. ","offers":[{"title":"Zero Clearance","offer_id":46278660653206,"sku":"TS-TP1","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Standard","offer_id":46278660685974,"sku":"TS-TP2","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Standard with splitter slot","offer_id":46278660718742,"sku":"TS-TP3","price":50.0,"currency_code":"USD","in_stock":true},{"title":"6\" Dado","offer_id":46278660751510,"sku":"TS-TP4","price":50.0,"currency_code":"USD","in_stock":true},{"title":"8\" Dado","offer_id":46278660784278,"sku":"TS-TP5","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Molder Cutter Head","offer_id":46278660817046,"sku":"TS-TP6","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/image0_9b9022e3-c530-4bb5-b5fd-c4c2ea593ac5.jpg?v=1773853604"},{"product_id":"delta-unisaw-or-shaper-dust-door-knob-shaft-and-cam","title":"Delta Unisaw or Shaper Dust Door Knob, Shaft and Cam","description":"\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Tahoma',sans-serif;\"\u003eThis includes the knob, shaft and cam for the Unisaw and shaper dust door.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Tahoma',sans-serif;\"\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Tahoma',sans-serif;\"\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Tahoma',sans-serif;\"\u003eThe shaft is machined for connecting the locking cam and knob on your vintage Unisaw or Shaper dust door.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Tahoma',sans-serif;\"\u003eThe shaft is designed for a light press-fit into the knob.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eHowever, each order has a small container of Loctite retaining compound to securely attach the new shaft and knob.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Tahoma',sans-serif;\"\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Tahoma',sans-serif;\"\u003eThe knob is\u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif;\"\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Tahoma',sans-serif; color: black;\"\u003e1 5\/8” diameter knob and CNC machined from billet aluminum bar, with fourteen (14) deeply radiused flutes equally spaced around its perimeter.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eThese flutes allow the operator to easily grip and turn the knob.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Tahoma',sans-serif; color: black;\"\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Tahoma',sans-serif; color: black;\"\u003eThese knobs are installed with a light press fit on the shaft as the OEM knobs did.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eWe have provided a hidden air bleed relief in the bore to facilitate the press fit of the shaft into the knob\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003cb\u003e \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Tahoma',sans-serif;\"\u003eOur replacement cam is CNC machined from 6061 billet aluminum bar and is better than the OEM part that was die cast and zinc plated.\u003c\/span\u003e\u003c\/b\u003e\u003cspan style=\"font-family: 'Tahoma',sans-serif;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Tahoma',sans-serif;\"\u003eThe cam is designed for a slip fit onto the dust door shaft. We have moved the set screw retaining hole to the opposite side of the cam where there is more material present for the threaded hole.  The set screw securely holds the cam onto the shaft when tightened against the flat on the shaft, eliminating the need for the OEM style “D-shaped hole.\u003c\/span\u003e\u003c\/b\u003e\u003cspan style=\"font-family: 'Tahoma',sans-serif;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Tahoma',sans-serif;\"\u003eThe cam is provided complete with a 5\/16 stainless steel set screw in place.\u003c\/span\u003e\u003c\/b\u003e\u003cspan style=\"font-family: 'Tahoma',sans-serif;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: 'Tahoma',sans-serif; color: black;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Vintage Delta Supply Co. ","offers":[{"title":"Default Title","offer_id":46279743176854,"sku":"TS-019","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/image2_99c3331b-0780-45e5-b665-3eb661e6b2de.jpg?v=1772835678"},{"product_id":"delta-saturn-knob-in-solid-brass","title":"Delta Saturn Knob in Solid Brass","description":"\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center; line-height: normal;\"\u003e\u003cb\u003eThis is the \"Saturn\" knob replacing Delta no. 931-01-01-011-4091 used on many Delta machines. We have recreated this classic style with our CNC machine in solid brass using the same size OD 1.6\" spec as the OEM knob. Then hand polished to a brilliant shine. These will make a great accent part to customize your machine. Don't settle for the old Bakelite knob. We also offer the Saturn knob in 6061 billet aluminum. in either Black anodized or polished bright.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" align=\"center\" style=\"text-align: center; line-height: normal;\"\u003e\u003cb\u003eThese knobs are heavy! Weighing over 1\/2 lb. of solid brass!  \u003c\/b\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan style=\"font-size: 12.0pt; line-height: 115%; font-family: 'Aptos',sans-serif; mso-ascii-theme-font: minor-latin; mso-fareast-font-family: Aptos; mso-fareast-theme-font: minor-latin; mso-hansi-theme-font: minor-latin; mso-bidi-font-family: 'Times New Roman'; mso-bidi-theme-font: minor-bidi; mso-ansi-language: EN-US; mso-fareast-language: EN-US; mso-bidi-language: AR-SA;\"\u003eThreads are 3\/8” – 24, 5\/8” deep\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Vintage Delta Supply Co. ","offers":[{"title":"Default Title","offer_id":46279835582614,"sku":"KB-014BRS","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/image0_a2acff05-e6b1-4446-b4dd-3fb8fa1f83d1.jpg?v=1772839988"},{"product_id":"delta-unisaw-jet-lock-fence-shaft-and-round-knob-copy","title":"DELTA UNISAW JET-LOCK FENCE SHAFT AND BRASS KNOB","description":"\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eA new solid brass Saturn knob and stainless-steel threaded shaft for the locking lever on your Delta Unisaw fence.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eThese brass knobs are heavy. Just over 9 oz. It takes 1 lb. of solid brass to make these knobs!\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cb\u003e\u003cu\u003e\u003cspan\u003eThis is for the solid brass knob and stainless steel shaft. See our other listings for billet aluminum anodized black and polished Saturn knob!\u003c\/span\u003e\u003c\/u\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e  \u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cb\u003eReplace the chipped, cracked, or missing knob on your everyday saw or during your vintage Unisaw restoration project.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e \u003cstrong\u003eThis is a replacement knob and shaft for the lock lever on a Jet-lock fence found on many of the vintage Delta Unisaws. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cstrong\u003eThe Saturn knobs have a 3\/8 - 24 x 5\/8\" deep internal thread, just like the OEM knobs had. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cstrong\u003eThe original locking lever shafts were made of carbon steel and prone to rusting and bending. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp align=\"center\" class=\"MsoNormal\"\u003e\u003cstrong\u003eThe shaft in this listing is precision machined from type 303 stainless steel rod with 3\/8 - 24 threads on both ends to match both the ball's internal thread and threads in the OEM locking cam inside the head casting of the vintage Delta Unisaw fence.\u003c\/strong\u003e\u003c\/p\u003e","brand":"vintagedeltasupply","offers":[{"title":"Default Title","offer_id":46286694056086,"sku":"KB-009B","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/image0_61bf5f3f-dacf-4840-a385-62db05566fa0.jpg?v=1773163659"},{"product_id":"delta-unisaw-stainless-steel-hardware-kit-145-piece","title":"DELTA UNISAW STAINLESS STEEL HARDWARE KIT - 145 PIECE","description":"\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eA COMPLETE SET OF STAINLESS-STEEL FASTENERS FOR REPLACING THE ORIGINAL HARDWARE WHEN RESTORING YOUR VINTAGE DELTA UNISAW. \u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003e  Why sandblast, wire brush or paint those old nuts, bolts, screws, and washers, when you can get a whole new set of bright corrosion resistant stainless-steel fasteners.  \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003e \u003c\/b\u003e\u003cb\u003eWe have assembled the 145 pieces required to replace EVERY fastener in a vintage UNISAW from the tabletop down. \u003c\/b\u003e\u003cb\u003e \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eScrews are included to replace the rivets on the dust door tag…….and setscrews for the dust door latch and handwheels, screws for everything in the switch box, screws for the tilt and serial number tags, set screws for the pulleys, bolts for the yoke to the trunnions, bolts for the trunnions to the cabinet, the pinch bolt at the arbor casting, bolts for the table to the cabinet, bolts for the extension wings, and many more. \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eWe have included every fastener that’s required to put your Unisaw back together. \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eWe have included the hard-to-find bolts for the escutcheon at the tilt shaft and for the tilt pointer cylinder.  Carriage bolts are included for attaching the base casting to the cabinet. \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eAlso included are all of the stainless-steel flat washers, stainless-steel lock washers, and nuts where they are needed. \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eAll screws, bolts, flat washers, and lock washers are made from top-of-the-line, high quality, corrosion resistant 18-8 stainless steel.  The few hex nuts that are included are not stainless steel.  These are provided in Grade 5 zinc plated steel, so you will have no issues with stainless-to-stainless thread galling. \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eAs in all of our restoration projects, we recommend using a small amount of Loctite brand anti-seize compound. \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan style=\"color: #0039f3;\"\u003eYou will also get a color-coded detailed fastener inventory listing that tells what goes where and what gets a flat washer and\/or a lock washer.   No need to have saved all those pages of notes from when you took your Unisaw apart.\u003c\/span\u003e  \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eThere is enough info on our inventory list to put your Unisaw back together, same as it came apart. \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eWe have also included a HELPFUL HINT sheet to assist in the placement of these fasteners during the Unisaw reassembly. \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eSight-unseen fasteners, like inside the switch box, have been upgraded from old fashioned slotted head screws to Phillip's head screws to facilitate easier installation.  Fasteners that show, like the tilt shaft escutcheon, match the original slotted head fillister bolts for authenticity. \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eEach fastener is described in detail......bolt diameter, thread size, length, head type, quantity, location used, whether to install with flat washer, whether to install with lock washer, etc.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eThis kit is for the complete Unisaw reassembly, from the table down.  No fasteners are included for the fence rails or the fence. We are working on stainless custom kits for these items separately, but they are not yet available.  \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan style=\"color: #0039f3;\"\u003eEach fastener set is carefully counted and packaged by screw or bolt size, in individual Zip-lock bags, numbered 1 through 7.  Bag 8 contains all of the flat washers, lock washers, and nuts. \u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eWe also offer a stainless-steel motor mount pin with new hairpin clips and a stainless-steel handle with a new billet aluminum or brass Saturn knob for the fence locking lever.  \u003c\/b\u003e\u003c\/p\u003e","brand":"Vintage Delta Supply Co. ","offers":[{"title":"Default Title","offer_id":46290270912662,"sku":"HW-006","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/s-l1600_10d03893-ebb8-48e0-a443-8e237881054c.webp?v=1773336518"},{"product_id":"delta-unisaw-bullet-lock-shaft","title":"DELTA UNISAW BULLET LOCK SHAFT","description":"\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003eDELTA UNISAW BULLET LOCK SHAFT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003eThis unisaw locking shaft is for the brass bullet locking type shaft. It will not work if you have the wedge style locking shaft. Brand new and black oxide plated for corrosion resistance.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cstrong\u003eSee our other listing for the short wedge lock shaft.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Vintage Delta Supply Co. ","offers":[{"title":"Default Title","offer_id":46378233954454,"sku":"TS-020","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/image1_8bfffb4e-0fec-454c-9847-060c226f3222.jpg?v=1778294354"},{"product_id":"delta-unisaw-contractor-saw-arbor-wrench-and-hanger","title":"DELTA UNISAW\/CONTRACTOR SAW ARBOR WRENCHS AND HANGER","description":"\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003eThis 7\/8” Arbor nut wrench is laser cut and powder coated. These are made in USA and are much heavier and stronger than the OEM Delta wrenches. We offer three wrenches that include the Standard Black, Deluxe Red and the Silver zinc plated 29\/32\" \" wrench for behind the arbor. We also have the wrench hanger sold separately to conveniently store your wrenches on your Unisaw or Contractor saw.\u003c\/p\u003e","brand":"Vintage Delta Supply Co. ","offers":[{"title":"Red","offer_id":46404100817046,"sku":"TS-021","price":32.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":46404100849814,"sku":"TS-022","price":26.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":46404100882582,"sku":"TS-023","price":28.0,"currency_code":"USD","in_stock":true},{"title":"WRENCH HANGER","offer_id":46404118249622,"sku":"TS-024","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/image4_6b90051f-f2cf-4b92-9e01-524d8f9fd18b.jpg?v=1780189701"},{"product_id":"vintage-delta-10-unisaw-pointer-casting-replacement","title":"VINTAGE DELTA 10\" UNISAW POINTER CASTING REPLACEMENT","description":"\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003ePointer Casting Replacement for Vintage Delta 10\" Unisaw\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eReplaces Obsolete Delta Part No. LTA-459\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eIs your Unisaw blade elevation lock slipping even after installing new brass bullets?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eThe problem may not be the bullets.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eMany vintage Delta Unisaws suffer from excessive wear inside the original die-cast zinc pointer casting (LTA-459). While restorers often replace the brass bullets, the pointer casting itself is frequently overlooked. Once the bore inside the casting becomes worn, new bullets alone cannot properly lock the elevation shaft.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eTo solve this problem, we developed a precision-machined steel replacement assembly designed to permanently eliminate the wear issues associated with the original die-cast part.\u003c\/b\u003e\u003c\/p\u003e\n\u003cdiv class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003chr size=\"2\" width=\"100%\" align=\"center\"\u003e\u003c\/div\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eWhy the Original Design Fails\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eDelta originally used a wedge-style locking system on early Unisaws before switching to the familiar brass bullet system around 1950.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eBoth systems operate by forcing locking components outward against the inside wall of the surrounding bore. Unfortunately, neither design retracts the locking components when the knob is loosened. As a result, the wedges or bullets continue to rub against the inside surface whenever the handwheel is turned.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eOn the blade elevation lock, that wear occurs inside the pointer casting.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eThe original LTA-459 casting was manufactured from die-cast zinc, a material significantly softer than the steel wedges and even softer than the shaft itself. Over decades of use, the inside bore becomes worn and grooved.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eWhen this occurs:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul style=\"margin-top: 0in; text-align: center;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list .5in;\"\u003e\u003cb\u003eThe elevation lock may not hold properly. \u003c\/b\u003e\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list .5in;\"\u003e\u003cb\u003eNew brass bullets often fail to correct the problem. \u003c\/b\u003e\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list .5in;\"\u003e\u003cb\u003eExcessively worn castings can allow the bullets to overextend. \u003c\/b\u003e\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo1; tab-stops: list .5in;\"\u003e\u003cb\u003eSevere wear can make disassembly difficult or impossible. \u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eIf your elevation lock still slips after installing new brass bullets, a worn pointer casting is often the real culprit.\u003c\/b\u003e\u003c\/p\u003e\n\u003cdiv class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003chr size=\"2\" width=\"100%\" align=\"center\"\u003e\u003c\/div\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eOur Solution\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eOur replacement pointer casting is manufactured from three CNC-machined pieces of C1018 steel.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eAfter machining, the components are precision fixtured and TIG welded into a single assembly. The completed weldment is then precision bored to provide a proper fit on the front rocker casting bushing and finished with a black oxide coating for corrosion resistance.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eUnlike the original die-cast zinc component, this steel assembly will not wear from normal contact with the locking wedges or brass bullets.\u003c\/b\u003e\u003c\/p\u003e\n\u003cdiv class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003chr size=\"2\" width=\"100%\" align=\"center\"\u003e\u003c\/div\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Segoe UI Symbol',sans-serif; mso-bidi-font-family: 'Segoe UI Symbol';\"\u003e✔\u003c\/span\u003e Direct replacement for obsolete Delta part LTA-459\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Segoe UI Symbol',sans-serif; mso-bidi-font-family: 'Segoe UI Symbol';\"\u003e✔\u003c\/span\u003e Eliminates wear problems common to original die-cast pointer castings\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Segoe UI Symbol',sans-serif; mso-bidi-font-family: 'Segoe UI Symbol';\"\u003e✔\u003c\/span\u003e Manufactured from CNC-machined C1018 steel\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Segoe UI Symbol',sans-serif; mso-bidi-font-family: 'Segoe UI Symbol';\"\u003e✔\u003c\/span\u003e Precision TIG welded construction\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Segoe UI Symbol',sans-serif; mso-bidi-font-family: 'Segoe UI Symbol';\"\u003e✔\u003c\/span\u003e Precision bored after welding for accurate fit\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Segoe UI Symbol',sans-serif; mso-bidi-font-family: 'Segoe UI Symbol';\"\u003e✔\u003c\/span\u003e Black oxide finish for corrosion protection\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Segoe UI Symbol',sans-serif; mso-bidi-font-family: 'Segoe UI Symbol';\"\u003e✔\u003c\/span\u003e Accepts original pointer and locking components\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Segoe UI Symbol',sans-serif; mso-bidi-font-family: 'Segoe UI Symbol';\"\u003e✔\u003c\/span\u003e Includes mounting hardware\u003c\/b\u003e\u003c\/p\u003e\n\u003cdiv class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003chr size=\"2\" width=\"100%\" align=\"center\"\u003e\u003c\/div\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eIncluded\u003c\/b\u003e\u003c\/p\u003e\n\u003cul style=\"margin-top: 0in; text-align: center;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo2; tab-stops: list .5in;\"\u003e\u003cb\u003e(1) Steel Pointer Casting Weldment \u003c\/b\u003e\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo2; tab-stops: list .5in;\"\u003e\u003cb\u003e(2) 8-32 Stainless Steel Socket Head Cap Screws \u003c\/b\u003e\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo2; tab-stops: list .5in;\"\u003e\u003cb\u003e(1) 10-32 Stainless Steel Anti-Rotation Set Screw \u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003chr size=\"2\" width=\"100%\" align=\"center\"\u003e\u003c\/div\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eCompatibility\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eFits many vintage Delta 10\" Unisaws utilizing the original LTA-459 pointer casting and brass bullet locking system.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eIf you are unsure whether your saw uses this casting, send us a photo and we will gladly verify compatibility before purchase.\u003c\/b\u003e\u003c\/p\u003e\n\u003cdiv class=\"MsoNormal\" align=\"center\" style=\"text-align: center;\"\u003e\u003chr size=\"2\" width=\"100%\" align=\"center\"\u003e\u003c\/div\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eImportant\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eInstalling new brass bullets in a worn pointer casting will not restore proper locking performance. This replacement casting addresses the actual wear point in the elevation lock system and provides a long-term solution for maintaining proper blade height adjustment.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eManufactured by Vintage Delta Supply Co. LLC\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: center;\"\u003e\u003cb\u003eDesigned and built specifically for restorers who demand a permanent solution rather than another temporary repair.\u003c\/b\u003e\u003c\/p\u003e","brand":"Vintage Delta Supply Co. ","offers":[{"title":"Default Title","offer_id":46404685398166,"sku":"TS-025","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/files\/image1_5ef064bd-90be-404e-a64e-7dfd3848efd3.jpg?v=1780284776"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0708\/2269\/0966\/collections\/69136f9a947629a3287d0632_PXL_20250817_194631656.jpg?v=1764970349","url":"https:\/\/vintagedeltasupply.com\/collections\/unisaw-table-saw-bandsaw-parts.oembed?page=3","provider":"Vintage Delta Supply Co. ","version":"1.0","type":"link"}